Citizen D710/D716 Watch User Manual


 
3. Using the Destination Timer Mode
The destination timer measures and displays the amount of time remaining until arriving at
a destination up to a maximum of 99 hours, 59 minutes and 59 seconds after having set
the destination and arrival time when traveling or on business overseas. Once the arrival
time is reached, an alarm informing you of arrival sounds for about 30 seconds and "Dest"
is displayed on the display. After arrival, elapsed time from the time of arrival is measured
for up to 99 hours, 59 minutes and 59 seconds.
In addition, the alarm informing you of arrival at your destination can be selected from 15
types of alarm sounds.
A. Setting the Destination Timer
(1) The watch switches to the correction state (display flashes)
when the upper left button (C) is pressed for at least 2 seconds
and then released in the destination timer mode.
(2) The flashing item changes in the order shown below each time
the upper left button (C) is pressed once.
• Pressing the upper left button (C) and then releasing in the alarm
number correction state returns the watch to the normal display.
(3) The flashing item can be corrected by pressing either the upper right button (B) or
lower right button (A).
• Pressing the upper right button (B) advances the display by one step at a time each time it is
pressed, while pressing the lower right button (A) moves the display back by one step at a time
each time it is pressed. (Pressing either button continuously causes the display to change
rapidly.)
• Refer to the section on "Locations Displayed by this Watch" for information on displayed
locations.
• When switching daylight savings time (ON or OFF is flashing), the display switches back and
forth between the settings each time the lower right button (A) or upper right button (B) is
pressed once.
(C)
(D)
(B)
(A)
(C)
(D)
(B)
(A)
35
[Arrival Time
Display]
Destination
Arrival time
Remaining time
Current time in
time mode
[Remaining Time Display]
Alarm
number
Minutes Hours Date
Location
Daylight savings
time switching
Year Month
(C) (C) (C)
(C)
(C) (C) (C)
Flashing