Filter
Top Products
69
[Time Display]
[No Display]
(D) for at least 2 seconds
(A)
[Date Display]
The low power mode is a special mode for allowing the watch to run while using the
minimum amount of current consumption. When the watch becomes insufficiently
charged, it automatically switches to this mode to conserve current consumption. In
addition, the watch can be manually switched to the low power mode by pressing the
lower right button (A) and lower left button (D) simultaneously for at least 2 seconds and
then releasing in the time mode of the standard mode.
* Since all functions except for the time/date display and correction functions do not operate in the
low power mode, do not use this mode when using (wearing) the watch under normal
circumstances.
1. Switching the Display
• The time and date displays switch back and forth each time the lower right button (A) is
pressed once.
• The entire display goes out (no display) when the lower left button (D) is pressed for at
least 2 seconds and then released during the time display or date display. Pressing the
lower left button (D) again for at least 2 seconds and then releasing returns the watch to
the time display.
• The watch returns to the time mode of the standard mode (or to the surface mode when
the surface mode has been activated) when the lower right button (A) and lower left
button (D) are pressed simultaneously for at least 2 seconds and then released during
the time display or date display.
Low power mode (Temporary function)
(C)
(D)
(B)
(A)