Filter
Top Products
2. Explanation of Warning Functions
Insufficient Charge Warning
When the watch becomes insufficiently charged, "BATT" flashes in
the lower left corner of the display in all of the modes of the
standard mode. Operation of the following functions is limited while
this warning function is activated.
• The watch does not switch to the dive mode even if the water
sensor gets wet. (The watch automatically switches to the charge
level indicator display of the system monitor mode when the water sensor gets wet.)
• None of the alarms sound.
• Data cannot be transferred by infrared communication. (However, data can be
transmitted to a personal computer by USB communication.)
• The EL light is not illuminated.
When this warning function is activated, charge the watch by attaching to the
charger as soon as possible. The display will return to normal once the watch is
sufficiently charged.
* None of the dive alarms sound when the insufficient charge warning function is activated during
diving. Although the dive computer will function normally for about 30 minutes after “BATT”
starts to flash, the log data for that dive is not recorded after “BATT” has started flashing.
Promptly begin to ascend it this warning function is activated during diving.
* If the watch remains insufficiently charged after the insufficient charge warning function has
been activated, it switches to the low power mode after about 2 days. Please note that if the
watch continues to be left uncharged in the low power mode, all functions stop and all watch
settings return to the initial (default) settings.
File Error Warning
When the amount of available memory in flash memory becomes
low, "FILE" flashes in the lower left corner of the display in all of the
modes of the standard mode as well as in the dive mode. The
watch automatically switches to the flash memory status display of
the system monitor mode when the water sensor gets wet while this
warning function is activated. Please note that although it is
possible to use the watch for diving in this state, log data may not be recorded in flash
memory during diving.
The file error warning function is also activated and additional log data is not recorded if
the duration of a single dive exceeds 2 hours or if more than 15 dives are made in a single
day. The file error warning function may also be activated when the water temperature
during diving is low. It may not be possible to receive watch settings by data
communication while the file error warning function is activated.
When the watch has switched to the file error warning display, perform the garbage
collection procedure in the system monitor mode of the standard mode. The
display returns to normal following completion of garbage collection.
48
Flashing
Flashing