Filter
Top Products
55
This mode is used to set the plan for the next dive. The dive plan mode uses the three
displays described below.
•
Dive Condition Display:
This lets you change between AIR diving and NITROX diving and
set the oxygen concentration (O
2%). Continuously displays the
current settings.
• Dive Plan Display: This lets you display the number of the next dive for repetitive diving,
a graph of the body nitrogen level, and the no-decompression limit
time corresponding to initial and repetitive diving.
• Dive Alarm Display: This lets you display and set the depth alarm and dive time alarm.
1. Switching the Display
The display changes each time the lower right button (A) is pressed once in the dive plan
mode. The displayed contents differ between when the watch is set to AIR and when it is
set to NITROX diving.
Using the Dive Plan Mode
Body nitrogen level graph
Dive time
alarm
Dive condition mark
Depth alarm
[Dive Condition Display]
<AIR Diving>
[Dive Plan Display] [Dive Alarm Display]
(C)
(D)
(B)
(A) (A)
(A)
(A) (A)
(A)(A)
No. of next dive for
repetitive diving
Limit depth
relative to
oxygen
concentration
Oxygen concentration
[Dive Condition Display]
<NITROX Diving>
[Dive Plan Display] [Dive Alarm Display]
(C)
(D)
(B)
(A) (A)
(A)
(A) (A)
(A)
Oxygen concentration