Filter
Top Products
25
Dive Plan Mode
This mode is used to set the plan for the next dive. It can be used to change the AIR or
NITROX settings and set the oxygen concentration (O
2%) for the next dive, display the no-
decompression limit time and set the dive alarms used during diving.
Scuba Diving Log Mode
This mode is used to confirm the logs of previous scuba diving. In this mode, the watch
displays various data (logs) for scuba diving automatically recorded while diving.
Skin Diving Log Mode
This mode is used to confirm the logs of previous skin diving. In this mode, the watch
displays various data (logs) for skin diving automatically recorded while diving.
Dive Mode
This mode is used for diving. The watch automatically switches to the dive mode when a
dive is started, and displays current water depth, dive time and other data required while
diving during the course of a dive.
Surface Mode
In this mode, the watch displays the elapsed time since completion of the most recent
scuba dive and the amount of time flying in an aircraft is prohibited (maximum 24 hours)
(no fly time). The surface mode is no longer displayed once the no fly time has elapsed.
Infrared Communication Mode
This mode is for communicating with a PC or communicating between watches using the
infrared communication function.
Low power mode (Temporary function)
The low power mode is a temporary function for powering the watch with the minimum
amount of current consumption. The watch automatically switches to the low power mode
when it has become insufficiently charged.
Do not wear the watch in the low power mode during daily use. Although the watch
can be manually switched to this mode by operating the buttons, all functions except
for time and date display and correction do not operate. In addition, the watch cannot
be switched from the low power mode to the dive mode.