Citizen D710/D716 Watch User Manual


 
100
1. Watch
K Movement No. : D710 (meter specifications)/D716 (feet specifications)
K Crystal oscillation frequency: 32,768 Hz (Hz = no. of oscillations per second)
K Watch operating temperature range: 0°C to +50°C (32°F to 122°F)
K Timekeeping accuracy: ±20 seconds per month on average (when wearing at normal
temperatures of +5°C to +35°C / 41°F to 95°F)
K Depth gauge accuracy: ± (3% of displayed value + 0.3 m (1 ft)) (when used at a
constant temperature)
* Guaranteed accuracy temperature range: +10°C to +40°C (50°F to 104°F) (accuracy
of water depth measurement is affected by changes in ambient temperature)
K Water depth measurement range: 1.0 m (4 ft) to 80.0 m (266 ft)
K Water temperature measurement accuracy: Displayed value ±3°C (6°F)
K Modes and Display Functions
W Standard Mode
• Time: Hours, minutes, seconds, location, month, date, day, year (during correction
only), charge level indicator, dive condition, daily graphic (must be set with a PC)
• Travel time: Month, date, hours, minutes, seconds, location, time difference with
UTC time and time in time mode
• Destination timer: Time remaining until arrival, arrival time (location, month, date,
day, hours, minutes)
• Alarm: Alarm time (hours, minutes)
• Chronograph: Hours, minutes, seconds, 1/100 seconds, split time (100 hour clock)
• Timer: Minutes, seconds (set up to 99 minutes in 1 minute units)
• System monitor: Charge level indicator, display of flash memory usage status
W Dive Plan Mode:
AIR/NITROX setting, oxygen concentration (O
2%) setting, dive number, body
nitrogen level graph, no-decompression limit time, depth alarm (setting of depth and
number of times alarm sounds), dive time alarm (setting of dive time)
W Scuba Diving Log Mode:
Dive condition mark, total no. of dives, dive date, dive number, set oxygen
concentration (during NITROX diving), surface interval time, in time, out time, dive
time, minimum water temperature, decompression dive record, maximum depth,
average depth, profile log
W Skin Diving Log Mode:
Dive date, dive number, maximum depth, time in, time out, dive time, previous
maximum depth and date recorded
W Dive Mode
Current time, current depth, dive time, maximum depth, no-decompression limit
time, water temperature, body nitrogen level graph, safety stop graph, safety stop
time, decompression stop instructions display, decompression stop graph, body
partial pressure of oxygen (PO
2), set oxygen concentration (O2%)
W Surface Mode
Elapsed time after diving (max. 24 hours), no fly time
Specifications