Filter
Top Products
60
The scuba diving log mode is used to display the scuba diving log automatically recorded
by the watch during scuba diving. The skin diving log mode is used to display the skin
diving log automatically recorded by the watch during skin diving. A maximum of 100 sets
of log data can be recorded for both scuba diving and skin diving (provided that the dive
time of a single dive is within 2 hours and no more than 15 dives per day). The contents
of log data for a single dive are displayed using three displays for both the scuba diving
log and skin diving log modes.
1. Calling Up Scuba Diving Log Data
(1) The most recent scuba diving log data is displayed when the watch is switched to the
scuba diving log mode by pressing the lower left button (D).
(2) The log data that you want to view can be selected by pressing either the lower right
button (A) or upper right button (B). Logs are identified according to the number of the
dive (No.) among the total number of dives.
* Old log data is called up each time the lower right button (A) is pressed once, while new log
data is called up each time the upper right button (B) is pressed once. (Pressing either button
continuously causes the log data to change rapidly.)
(3) The display of the selected log data changes each time the upper left button (C) is
pressed once.
Using the Scuba Diving Log Mode and Skin Diving Log Mode
AIR diving NITROX diving
<2nd Display>
<3rd Display>
<1st Display>
• Dive date
• -1-: Number of dive (first dive on that day)
• O
2**%: Oxygen concentration
• No. : Total number of dives
• : Dive condition mark (Air)
• Surf: Surface interval time
• Z : Time in
• Y : Time out
• Div. T: Dive time
• Minimum water temperature
• DECO: Decompression dive record
• Profile log
• Avg: Average depth
• Max: Maximum depth
(C)
(C)
(C)