Filter
Top Products
37
[Remaining Time
Display]
Remaining
time
Flashing
Location
(B)
(B)
(B)
Arrival time
Location in time mode
Time in location selected for
arrival time in time mode
[Elapsed Time
Display]
<Displaying Arrival Time Set during Measurement>
(1) When the upper right button (B) is pressed once while the destination timer is running,
the set arrival time (destination location and time) is displayed.
(2) When the upper right button (B) is pressed once again while the arrival time is
displayed, the time and location of the location selected in the time mode for the set
arrival time are displayed.
(3) Pressing the upper right button (B) once again returns the watch to the remaining time
display.
* The watch automatically returns to the remaining time display when none of the buttons are
pressed for about 3 minutes during the arrival time confirmation displays described in steps (1)
and (2) above.
* The watch automatically returns to the time mode when none of the buttons are pressed for
about 3 minutes in the destination timer mode (including when the destination timer is running).
Time up
Elapsed time from arrival time