Filter
Top Products
62
* "NO LOG" is displayed when there is no skin diving log data recorded.
* Maximum depth is displayed as "--.- m" when the maximum depth has exceeded 80.0 m (266 ft)
while diving.
* “--.- °C” is displayed for minimum water temperature in the case of log data for which the dive
time is less than 1 minute.
* Calling up log data may take some time when there is a large amount of log data recorded. In
such cases, "WAIT" is displayed while log data is being called up. The water sensor and none
of the button operations function while "WAIT" is displayed.
3. Deleting Log Data
Individual sets of log data cannot be deleted. When a new dive is made when there are
already 100 sets of dive data recorded for the total dive data of scuba diving log data and
skin diving log data, the oldest log data is automatically deleted.
CAUTION
It is strongly recommended to promptly record important log data in another
storage medium.
When a new dive is made and there are already 100 sets of dive data recorded for
the total dive data of scuba diving log data and skin diving log data, the oldest log
data is automatically deleted. In addition, since there is also the possibility of data
being lost due to a malfunction in the watch or during repairs or inspections, it is
recommended to promptly transfer data to a personal computer following completion
of diving. Please note that the manufacturer cannot be responsible for data that is
lost due to a malfunction.