Filter
Top Products
CYCLOPS (2001-12) R5976426 10-6
10.10 Uniformity
Changing these settings may seriously affect the performance of the projector
Push the cursor key up or down to highlight 'Uniformity'.
When
Uniformity is selected in the Service Mode selection menu, the following warning will be
displayed :
Uniformity is reserved to qualified service personnel.
If you are not qualified, press
EXIT to cancel the uniformity.
10.11 Preset Input Balance
Changing these settings may seriously affect the performance of the projector.
When Preset Input Balance is selected in the Service Mode selection menu, the following warning
will be displayed :
Preset Input Balance is reserved to qualified service personnel.
If you are not qualified, press
EXIT to cancel the preset input balance.
10.12 I2C Diagnosis.
Gives an overview of the correct working of the I²C controlled IC's.
Highlight
I2C diagnosis by pushing the cursor key up or down and press ENTER to display the
overview.