Filter
Top Products
CYCLOPS (2001-12) R5976426 3-2
3.1 Components of Cyclops
C
YCLOPS consists of the following components:
Mechanical structure: the metal housing incorporates the projector, mirror and screen.
Projector: The projector employed in C
YCLOPS is based on most modern 3-panel poly-Silicon
LCD technology. It is an independent device, including lamp, control unit, interfaces. The
projector is mounted on a support; once adjusted, the position is locked, and no re-adjustment
is needed.
Deflection mirror: a mirror in the top part of the housing deflects the light onto the rear of the
projection screen.
For Cyclops 100S, two kinds of screen are available, a double element Fresnel-Lenticular
screen with high gain and a single element diffusion screen with high vertical and horizontal
viewing angles (important when sitting close to the wall)
3.1.1 Structure
The structure incorporates the projector, the mirror, and the screen. All elements are optically ad-
justed to provide an optimized image. Due to the principle of rear projection, high contrast ratio is
provided even at daylight.
If required, Cylops can be outfit with an architectural trim around the screen and/or a cladding.
3.1.2 Deflection Mirror
Due to folding up the optical path by a mirror the entire depth of CYCLOPS is only
1487 millimeters.
3.1.3 Projection System
The projector is mounted via a support. The light path is folded up by a mirror to shorten the in-
stallation depth. The image is projected onto the rear of the screen.
1
2
3
1 Projector
2 Mirror
3 Screen