Filter
Top Products
CYCLOPS (2001-12) R5976426 8-12
8.3 Geometry
To start up the
Geometry functions:
Push the cursor key
up or down to highlight 'Geometry'.
Press
ENTER to select.
The
geometry menu will be displayed.
The following adjustments are possible:
horizontal and vertical image shift. to shift the image in a horizontal or vertical direction
horizontal and vertical image size to adjust the size in a horizontal or vertical direction
side keystone to align the image (only necessary if the projector is
mounted at a non standard projection angle).
blanking to frame the projected image on to the screen
aspect ratio to force the projector in a typical aspect ratio
options to change the geometry options
The following ways are possible to adjust a geometry function:
using the cursor key to adjust or
entering the value with the digit keys. Therefore, press
ENTER to select the indicated value and
enter the desired value with the digit keys. Press
ENTER to confirm the entered value.
8.3.1 Shift
The image can be shifted in a horizontal or vertical direction.
To start up the shift action:
Push the cursor key
up or down to highlight 'Shift'.
Press
ENTER to select.
Push the cursor key
up or down to shift the image in a vertical direction. Push the cursor key
left or right to shift the image in a horizontal direction. The default value for the shift is 0.
Shifting in a vertical direction: when the shift value is positive, the image is shifted upwards, when
the value is negative, the image is shifted downwards.
Shifting in a horizontal direction : when the shift value is positive, the image is shifted to the right,
when the value is negative, the image is shifted to the left.