Filter
Top Products
CYCLOPS (2001-12) R5976426 8-10
8.2.3 Color Depth
Increases color saturation of dark colors
To change the color depth value:
Push the cursor key
up or down to highlight 'Color Depth'.
Press
ENTER to select.
Change the value by pushing the cursor key
left or right until the desired color saturation is
reached: Adjustment range: 0 ... 8; default: 4
Press
EXIT to return to the Picture Tuning menu.
8.2.4 Black Color
Modiefies the color of the black image for color matching between projectors.
To change the black color :
Push the cursor key
up or down to highlight 'Black Color'.
Press ENTER to select.
Change the color of the black image by adding a certain amount of Red (R), Green (g) or Blue
(B)
Press
EXIT to return to the Picture Tuning menu.
Deviation from R=0, G=0, B=0 will result in a lower contrast ratio for the projector.
8.2.5 Audio Tuning
Push the cursor key up or down to highlight 'Audio Tuning'.
Press
ENTER to select. The Audio Tuning menu will be displayed.
The following items are available :
Volume to adjust volume
Balance to adjust balance
Bass to adjust bass
Treble to adjust treble
Mute to stop the sound reproduction
Fade to determine where the sound signals will be reproduced
Mode Sound reproduction can be done in stereo or mono
Video - Audio lock to lock an input source to an audio input
8.2.6 Volume, Balance, Bass and Treble
When a sound control is selected by highlighting the item with the cursor key, a text box with a
bar scale, icon and function name of the control, e.g.
'Volume' appears on the screen (only when
text is
ON). The length of the bar scale indicates the current memory setting for this source. For
more information about the sound controls, see
6.3.5 Sound controls with direct access