Filter
Top Products
CYCLOPS (2001-12) R5976426 5-5
Configuration of the 5-cable input
The configuration has to be done on the 'Input slot' menu.
To change the signal format:
Press
ADJUST or ENTER to start up the Adjustment mode.
Push the cursor key
up or down to select Installation
Press ENTER.
Press the cursor key
up or down to select 'Input Slots'
Press ENTER. The internal system will scan the inputs and displays the result in the 'Input
Slots' menu
.
Push the cursor key
up or down to select the first slot.
Press
ENTER key to toggle the input signal priority.
Possible indication:
RGB [HS&VS] RGB analog signals, separate sync is horizontal and vertical
sync.
RGB CS RGB analog signals, separate sync is composite sync.
RGB CV RGB analog signals, separate sync is composite video or tri-
level sync.
RGB-SOG RGB analog signals, sync on green is composite sync.
COMPONENT VIDEO - CS separate sync is composite sync.
COMPONENT VIDEO component video with composite sync on Y or composite tri-
level sync on Y.
VIDEO
S-VIDEO
When using an RCVDS 05 with a 5 cable output module, connect these 5 cables
to this 5-cable input slot (slot1) of the projector.
All sources of the RCVDS can now be accepted by the projector.