Filter
Top Products
CYCLOPS (2001-12) R5976426 9-3
9.2 800 Peripheral
Output module selection
When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to
be defined in the
800 peripheral menu.
The type of output module can be:
standard output module or
5 cable output module.
To define the output module:
Push the cursor key
up or down to highlight '800 Peripheral'.
Press
ENTER to select.
Push the cursor key
up or down to highlight 'Output module'.
Press
ENTER to toggle between 'Standard' or '5-cable'.
Infrared Communication
When a peripheral is connected to the 'Comm Port', the communication can be in PPM or RC5.
The type of communication can be set to:
PPM
RC5
To define the communication:
Push the cursor key
up or down to highlight 'Infrared'.
Press
ENTER to select.
Press
ENTER to toggle between [PPM] or [RC5].
9.3 Configuration
The configuration of the projector can be set up as follows:
Push the cursor key
up or down to highlight 'Configuration'.
Press
ENTER to select.
The
Configuration menu will be displayed.
For more information, see
13.1 Faults.
9.4 OSD color (On-Screen Display)
The highlighted items on the menus can be displayed in red, green or yellow.
To change this color setting:
Push the cursor key
up or down to highlight 'OSD color'.
Press
ENTER to select.
The
OSD color menu will be displayed.
Push the cursor key
up or down to highlight a color.
Press
ENTER to select.