Filter
Top Products
CYCLOPS (2001-12) R5976426 6-13
6.3.5 Sound controls with direct access
When a sound control is pressed, a text box with a bar scale, icon and function name of the con-
trol, e.g.
'volume...' appears on the screen (only if TEXT is ON). The length of the bar scale indi-
cates the current memorized setting for this source. The bar scale changes as the
+ or - buttons of
the control are pressed.
The picture controls can only be adjusted with the RCU.
Volume Control
Volume control adjusts the volume.
Use the
+ button for a higher volume.
Use the
- button for a lower volume.
Bass Control
Bass control adjusts the bass level (low tones).
Use the
+ button for more low tones.
Use the
- button for less low tones.
Treble Control
Treble control adjusts the treble level (high tones).
Use the
+ button for more high tones.
Use the
- button for less high tones.
Balance Control
Is only effective if a external amplifier with loudspeakers is connected to the audio output.
The
balance control adjust the sound level between the left and the right box.
Use the
+ button for a higher sound level on the right box than on the left one.
Use the
- button for a higher sound level on the left box than on the right one.
The Pause key
When the Pause key is pressed, the image projection is stopped, a blue screen will be displayed
and the projector remains with full power for immediate restart. The sound is not interrupted.
The display on front of the projector will show a
P.
To restart the image:
press
Pause key
press
EXIT key or
select a source number.
The Selection key
When the Selection key is pressed, the zoom/focus/shift menu will be displayed immediately.
To focus or zoom the image:
Push the
up or down key to zoom and left or right key to focus the image.
When finished, press
EXIT to return or ENTER to contiune to the shift adjustment
To shift the image:
Press
ENTER to switch to the shift menu
Push the up or down key to shift the image up or down and left or right key to shift the image
left or right.
When finished, press
EXIT to return or ENTER to continue to zoom/focus