Filter
Top Products
CYCLOPS (2001-12) R5976426 8-11
8.2.7 Mute
To stop the sound reproduction.
Push the cursor key
up or down to highlight 'Mute'.
Press
ENTER to toggle between [on] or [off]
8.2.8 Fade
Determine where the sound signals will be reproduced, internally or externally. Adjust the fade as
follows:
Push the cursor key
up or down to highlight 'Fade'.
Press
ENTER to select.
Adjust the desired
fade level.
The
fade can be adjusted between -15 and 15.
Fade on -15: no sound reproduction on the external loudspeakers, max on the internal loudspeaker
with the same volume level as adjusted with the
volume control.
Fade on 15: no sound reproduction on the internal loudspeakers but max on the external loud-
speakers with the same volume level as adjusted with the
volume control.
8.2.9 Mode [stereo]/[mono]
The sound reproduction can be done in mono or stereo. To install the mode:
Push the cursor key
up or down to highlight 'Mode'.
Press
ENTER to toggle between [stereo] or [mono].
8.2.10 Video - Audio lock
To lock an input source to an audio input, follow the next steps :
Push the cursor key
up or down to highlight the first input source.
Press
ENTER to toggle the associated audio input between [A], [B] or [C].
Push the cursor key
left or right to highlight another input source.
Press
ENTER to toggle between [A], [B] or [C].
Continue for the other inputs in the same way.