Topcom HBM Watch 2500
8
10 DUAL TIMER
10.1 Setting the dual timer
• Press the MODE button (D) until the Dual Timer Mode is displayed.
• Press and hold the RESET button (E) to enter the Timer Setting mode.
• Press the ST/STP button (A) to select the hour of the first timer.
• Press the RESET button (E) to confirm.
• Press the ST/STP button (A) to adjust the digits and press the RESET
button (E) to confirm each setting of the timer:
1. Minutes - Timer 1
2. Seconds - Timer 1
3. Hour - Timer 2
4. Minutes - Timer 2
5. Seconds - Timer 2
• Press the MODE button (D) to leave the setting.
10.2 Using the dual timer
• Press the ST/STP button (A) to start the timer.
• Timer 1 starts counting down.
• The last 3 seconds a beep is audible.
• When timer 1 is finished, it will automatically jump to timer 2 and continuous
counting down.
• When timer 2 is finished, the first cycle is finished.
• Automatically a new cycle will start for Timer 1.
• This will continue until the timer is stopped by pressing the ST/STP button (A)
or when 100 cycles have been run through.
• Press the MODE button (D) to clear the timer.
...