Filter
Top Products
Owner’s Manual: Advanced Programming and Troubleshooting 56
Viewing the Error Log
ERROR LOG scrolls across the display.
19.When you are ready, press OK to determine how many
errors exist in the error log or press the ▼ arrow key to
cycle back to the ODOMETER display.
Note: If there are no errors in the log, you will see NO
ERRORS displayed. When you press OK, you return to
the ODOMETER display.
20.Press OK again to view the first entry in the error log.
21.If more than one error is being stored, continue to press
the ▼ arrow key. Each error code specifies when it
occurred, listing the error code, odometer, hour meter
and current (amps) values.
Note: Use the ▲ arrow key to review prior error log
entries. To exit the error log, press OK while the code
scrolls across the display and you return to the
ODOMETER display.
22.Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
23.To erase the information in the error log, press and hold
QUICKSTART while the error code scrolls across the
display. The message, NO ERRORS, appears on the
display and remains static to let you know when the error
log has been erased.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues you
are experiencing with the treadmill before clearing the
error log.
24.When you are ready, press OK to cycle back to the
ODOMETER, or press PAUSE/RESET to return to the
banner.
M9.33-931_Owners Manual.book Page 56 Friday, January 11, 2008 7:42 AM