Precor 9.31 Treadmill User Manual


 
Owner’s Manual: Display Console 25
Data Keypad
Diagram 16: Data keypad
During an exercise session, you can use the number keys to
answer prompts and update information or adjust the incline
and speed.
The CLEAR and ENTER keys provide the following
functions:
CLEAR: Use the CLEAR key to remove the last number
being displayed.
ENTER: Use the ENTER key to accept the number being
displayed.
Note: The OK and ENTER keys are interchangeable and
provide the same function when no peripheral devices are
attached to the treadmill.
When you press the INCLINE or SPEED arrow keys, the lift
or running belt changes incrementally.
To adjust the incline in larger increments, take the
following steps.
1. To establish the direction of the lift, press the appropriate
INCLINE arrow key.
2. Within three seconds, press a number (0 – 15) followed
by a zero, and then press ENTER.
For example, to adjust the lift incline to 8% when the
display shows 2.0, you need to press the INCLINE up
arrow, press the number 8 and 0, and then press ENTER
or the INCLINE up arrow key.
If you wish to halt the lift’s movement, press either
INCLINE arrow key. The lift stops moving and the display
indicates the current incline level.
M9.33-931_Owners Manual.book Page 25 Friday, January 11, 2008 7:42 AM