Filter
Top Products
Owner’s Manual: Treadmill Safety Features 9
Treadmill Safety Features
The treadmill is equipped with certain items that, when used
properly, help sustain an enjoyable workout. These items
include:
• Safety clip and magnetic safety key
• Safety code
•Handrails
• Power switch
Important: Before exercising, review the Important Safety
Instructions found at the beginning of this manual.
Using the Safety Clip
Attach the safety clip to your clothing before each workout.
Refer to Diagram 4. A tug on the lanyard disengages the
magnetic safety key and trips the safety switch inside the
display console which stops the running belt.
If the safety switch trips while you are exercising, the running
belt stops and the treadmill enters pause mode. A ten-minute
countdown appears in the upper display.
Note: If the safety switch trips while the banner is scrolling
across the display, STOP KEY appears.
To resume exercising, take the following steps:
1. If needed, reattach the safety clip to your clothing and the
magnetic safety key onto the display console.
2. Straddle the running belt.
3. Press QUICKSTART or the SPEED up arrow key.
4. If needed, enter the safety code.
5. Hold onto a handrail while you step on to the running belt
with the speed at or below 1 mph or 1 kph.
Note: The treadmill retains your workout statistics if you
resume exercising within 10 minutes.
Diagram 4: Attach the safety clip to your clothing
Safety clip
Lanyard
M9.33-931_Owners Manual.book Page 9 Friday, January 11, 2008 7:42 AM