Filter
Top Products
Owner’s Manual: Advanced Programming and Troubleshooting 49
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you want to:
• Set the pause or cool-down times
• Set the maximum speed limit
• View the odometer
• Display the number of hours you have used your treadmill
• View the software versions and part numbers
• Display the serial number
• Check the usage log
• Check the error log
Advanced Programming Tips
• Always start at the banner.
9.33 banner: CHOOSE USER OR QUICKSTART OR A
PROGRAM TO BEGIN
9.31 banner: CHOOSE QUICKSTART OR A
PROGRAM TO BEGIN.
• The advanced programming and diagnostic mode is
accessed by pressing the red STOP button at the
banner. Any remaining key presses must occur quickly
and without pause.
• The QUICKSTART key is disabled while in programming
mode.
• The number keypad is disabled once you enter advanced
programming mode. You need to use the navigational
arrow keys to change the blinking prompts.
• Some keys provide the same functionality and can be
used interchangeably while in advanced programming
mode. These keys are:
OK and ENTER
PAUSE/RESET and the red STOP button
• The advanced programming prompts appear sequentially
and in a menu format. Pressing the arrow keys in the
navigational keypad moves you through the programs.
Press OK to choose or accept the displayed selection. To
return to the banner without saving any changes, press
PAUSE/RESET or the red STOP button.
M9.33-931_Owners Manual.book Page 49 Friday, January 11, 2008 7:42 AM