Filter
Top Products
NOTE
To reduce the risk of fire or burns, do not crush, puncture or dispose of
used batteries in fire or water. Only replace them with manufacturer-
specified batteries. Recycle or dispose of used batteries properly.
5.3.1. Replacing the battery of the Suunto t4
To replace the battery:
1. Use a coin to open the battery compartment on the back of your device. Ensure that the O
ring and all surfaces are clean and dry.
2. Remove the old battery.
3. Place the new battery into the battery compartment with the positive side facing up.
4. Slide the battery gently against the contact plate on the side, ensuring that it does not break
or bend out of place.
5. When replacing the cover, rotate it carefully counter-clockwise with your thumb in order to
align the threads. The cover should rotate easily at first without having to use force. If you
have to use force right at the start, the threads are misaligned and the threads may be
damaged.
6. Perform the final tightening with a suitably sized coin.
NOTE
The markings on the cover may be left unaligned once the cover has been
tightened. Ifthe old coveris undamaged, it does not need to be replaced.
NOTE
Ifthe threads ofthe battery compartmentcover are damaged, pleasesend
your device to an authorized Suunto representative for service.
42