Filter
Top Products
ELEVATION CALIBRATION
The Elevation Calibration function allows for calibration of the treadmill's elevation function. To enter the Elevation Calibration function:
1. While in the Maintenance Mode, navigate to the Elevation Calibration by the next or the previous parameter buttons.
Press the key, the Information Window will display the message “USE INCLINE +/- TO MOVE ELEVATION”.
2. Press the key, as necessary, until the treadmill is at its lowest elevation. When desired minimum elevation is obtained,
press the key.
3. Next press the key, as necessary, until the treadmill is at its highest elevation. When desired maximum elevation is
obtained, press the key.
8. Press the S
TOP key to exit the Elevation Calibration function.
STAR TRAC E SERIES TREADMILL O
WNER
’
S
M
ANUAL
41