Filter
Top Products
12
620-7920 Rev A
Step 22.
Secure the front of the motor shroud with (2)
#10 Truss head screws.
Step 23.
Now secure the sides of the motor shroud and
the bed covers to the frame with (4) #10 Truss
head screws.
Step 24.
Snap the front motor shroud cap in place, then
slide and install the neck grommet over the cap.
1
2
Step 21.
Re-install the shroud over motor compartment.
Slide the back end of shroud in place (where
shroud meets rails) then align the screw holes
on the front of shroud with the holes on the
frame.