Filter
Top Products
24
620-7920 Rev A
Step 21.
If not done already, position the treadmill where
you plan to use it. If necessary, level the tread-
mill using the two adjustable feet under the tail
roller. Loosen the lock nuts, rotate the feet until
the treadmill is stabilized, and retighten the lock
nuts.
Step 22.
Turn power on. Perform a visual inspection, and
test the features and functions of the unit prior to
use.
Note: Refer to the User’s Manual for calibration in-
structions and other settings.
YOU HAVE NOW COMPLETED THE EMBEDDED DISPLAY INSTALLATION
Step 20.
Install the lower display back cover onto display
using (6) M4 screws. Next install upper display
back cover onto display with (8) of the same
screws, tighten all screws.
Caution: Do not use power tools or over torque the
screws.