Filter
Top Products
42
620-7920 Rev A
Step 13.
Select the E-TRx headphone mount from the kit
and attach it to the available cut-out at the lower
front of the hot bar, then secure with previously
retained screw.
Step 14.
Take the E-TR headphone jack assembly from
the kit and install it onto the back of the center
console mount, then secure with (1) M4 screw.
Step 15.
Take the headphone jack cable from the PVS
neck and connect it to one end of the head-
phone jack, then take the headphone jack cable
from the Hot bar and connect it to the other end
of the headphone jack.
Note: The headphone jacks on the audio board are
interchangeable.
Step 16.
Plug the center console’s keypad cable into J7
connector on the display board.