Star Trac 620-7920 Treadmill User Manual


 
18
620-7920 Rev A
ATTENTION
Star Trac recommends that the treadmill be spaced a minimum of 20.0 inches (0.5 m) apart to
allow safe and easy ingress and egress. Even more importantly, there must be at least 48
inches (1.25 m) of free space behind the treadmill.
As with any motorized equipment, the area where treadmills are located must be free of obstruc-
tions and fixtures with sharp edges to prevent injury in the event that a user trips or loses bal-
ance and falls.
Use the checklist below to ensure the proper installation of the E-Series Treadmill:
1. All parts and hardware in the package are accounted for.
2. All screws are tightened down to their specified values.
3. Neck is properly mounted and secured to the base frame.
4. Left and right handrails are properly mounted and secured to the based frame.
5. Display frame is properly mounted and secured to the neck and handrails.
6. Electronic display console is properly mounted and secured to the display frame.
7. All cables and harnesses are properly plugged to their respective connectors.
8. All cables inside the motor compartment are routed away from all moving parts.
9. Motor shroud and side bed covers are properly installed and secured.
10. Unit is leveled to the floor.
11. Using a chest strap or wireless heart rate simulator, verify heart rate is recording properly.
12.
Once powered up, all features of the unit function properly.