Filter
Top Products
40
620-7920 Rev A
Step 5.
Connect the coax cable coming the treadmill
neck to the coax cable coming from the PVS
neck, secure tightly.
Now take the 5” silicon wrap from the kit and
peel off its protective tape then wrap the two
connectors so that all of the metal surface is
covered.
Step 6.
Plug-in the coax cable coming from your cable
service provider onto the coax connector lo-
cated at the base of the treadmill’s frame.
From PVS
From Neck
Silicon Wrap
Step 7.
Remove the screws to release the standard
console and remove wires or harnesses at-
tached to the display. Save screws for later
use.
Step 8.
Remove the standard center console from the
display.
Note: You will no longer need the center console,
and if desired, you can store it away for any possi-
ble future use.
Screws to be removed