Filter
Top Products
11
620-7920 Rev A
Step 17.
Now tighten the 4 display rail fasteners (where
neck is joined with display rail) to a torque
value of 200 in-lbs (22.5 Nm).
Step 18.
Tighten handrail fasteners where handrails are
joined with treadmill frame. Tighten the screws
to a torque value of 200 in-lbs (22.5 Nm). Re-
peat for the other side.
Step 19.
Verify that the side bed covers join properly to
the end caps and that there is no gap between
the two parts.
Step 20.
Fasten the side bed covers (left and right) with
(1) #10-24 x 3/4 Truss head screw on each
side.