Filter
Top Products
14
620-7920 Rev A
Step 1.
Remove electronic display console from pack-
aging materials.
Note: If you are installing an iPod® Kit, a MYE Entertain-
ment kit or a Personal Viewing Screen kit along with this
display, it is recommended that you install the kit’s center
console before you mount the display onto the frame.
Step 2.
If the back display covers are attached to display
console then remove and save them for later
use, otherwise proceed to the next step.
Step 3.
Position the display assembly near the top rail
while a helper makes the necessary connec-
tions.
LED DISPLAY CONSOLE INSTALLATION INSTRUCTIONS
Step 4.
Identify the cables coming from neck and rails:
Note 1: If the unit is not equipped with a PVS or iPod® kit,
then the PVS power cable and coax cable should be
tucked down the neck.
Note 2: The User-Detect cable is only available on the E-
TRxe model.
a. DC power cable f. Rail stop cable
b. Fan power cable g. E-Stop cable
c.
Contact heart rate cable
h. Coax cable
d. Headphone jack cable i. hot Bar keypad cable
e. Main I/O cable j. User-Detect
(E-TRxe only)
a
c
b
e
d
g
f
i
h
j