Filter
Top Products
17
620-7920 Rev A
Step 13.
Install the top back cover piece (p/n 020-7074)
onto the upper display back cover (p/n 020-
7069
).
Step 14.
Install the lower display back cover onto dis-
play using (6) M4 screws. Next install upper
display back cover onto display with (8) of the
same screws, tighten all screws.
Caution: Do not use power tools or over torque the
screws.
Step 16.
Turn the power switch on. Perform a visual in-
spection, and test the features and functions of
the unit prior to use.
Note: Refer to the User’s Manual for calibration in-
structions and other settings.
Step 15.
If not performed previously, position the tread-
mill where you plan to use it. If necessary, level
the treadmill using the two adjustable feet under
the tail roller. Loosen the lock nuts, rotate the
feet until the treadmill is stabilized, and re-
tighten the lock nuts.
YOU HAVE NOW COMPLETED THE E-TRx TREADMILL INSTALLATION