Filter
Top Products
44
620-7920 Rev A
Step 24.
Turn power on. Perform a visual inspection, and
test the features and functions of the unit prior to
use.
Note: Refer to the User’s Manual for calibration in-
structions and other settings.
Step 21.
Plug identified PVS connectors into the high-
lighted locations on the center console board.
Note: The DC power connectors on the center con-
sole board are interchangeable.
YOU HAVE NOW COMPLETED THE PERSONAL VIEWING SCREEN INSTALLATION
Step 22.
Secure the PVS center console in place using
the screws you saved earlier.
Step 23.
Install the lower display back cover onto display
using (6) M4 screws. Next install upper display
back cover with (8) M4 screws, tighten all
screws.
Caution: Do not use power tools or over torque the
screws.
1
3
2
5