Filter
Top Products
22
620-7920 Rev A
Step 13.
Connect the E-Stop cable (g) and the Contact
Heart Rate cable (c) to respective connectors on
the FitCpu board located on the back of embed-
ded display.
Contact heart rate
E-Stop
Step 14.
plug and secure the coax cable (h) into the
coax adapter on the tuner card of the embed-
ded display assembly.
Step 15.
Now plug the DC power cable (a) from the base
neck into DC connectors on the embedded dis-
play assembly.
DC Power
Step 12.
Connect the Hot Bar cable (i) to JP7 connector
on the center console board.
Hot Bar