Filter
Top Products
39
620-7920 Rev A
Step 2.
Verify following items included in hardware kit:
1.
(1) Silicon wrap
2. (2) Tie strap
3. (1) M8 nut
4. (1) 5MM Hex (Allen) key.
5. (1) Headphone jack label.
6. (5) Screw M4x.7, 19mm, Pan Head
7. (4) M8 x 20mm Button head screws.
8. (1) Alcohol wipe.
9. (1) E-TRx Hot Bar headphone jack assembly.
10. (1) E-TR headphone jack assembly.
Step 3.
Mount the PVS bracket on the treadmill. Using
the 5mm hex key, screw in the (2) M8 Button-
head screws at the base of the PVS first (do not
tighten yet). Install (1) M8 Button-head screw
into the hole on the PVS neck, then install (1)
M8 hex nut on the back side (do not tighten).
Step 1.
Remove all contents from the packaging and
verify that you have the following parts:
1. 1 PVS assembly with mounting
2. 1 PVS center console assembly.
3. 1 hardware kit
4. 1 Owner’s Manual
Note: If the center console is being installed on a
new unit, then perform this installation prior to mount-
ing the display assembly onto the frame.
Step 4.
Tighten the hex nut on the back of the neck.
M8 screw with M8
nut on the other side
M8 screw
PERSONAL VIEWING SCREEN (PVS) INSTALLATION INSTRUCTIONS
1
3
2
4
1
3
2
5
4
7
6
8
10
9