Filter
Top Products
E 62
1. Start the software.
2. If the receiver is in the Time of day display scroll up or
down until CONNECT is displayed.
3. Place the receiver less than 4" / 10 cm from the
loudspeaker.
4. Activate the upload function of the software.
5. The receiver automatically starts to upload the
information. Do not move the receiver during the data
transfer.
First
UpLink and COM appear.
Then
You will hear a chirping sound while information is transferred to the
receiver. All settings are transferred completely to the receiver when 100 %
is displayed.
If the data transfer was unsuccessful bring the receiver closer to the
loudspeakers or turn the volume level of the loudspeakers up.
Interrupt the data transfer from the computer by pressing the stop
button during data transfer. CONNECT is displayed.
The receiver automatically returns to the Time of day display after data transfer.
To be able to upload the settings from Polar Precision Performance
software via Polar Uplink, you need a personal computer with a sound
card (compatible with SoundBlaster™) and dynamic loudspeakers or
earphones.