Ingersoll-Rand MHD56298 Fitness Equipment User Manual


 
MHD56087 - Edition 4 5
REVIEW COPY 6
-
21
-
02
SPECIFICATIONS
Model Code Explanation: (Example FA5A-LXK1G) FA 5 A - L X K 1 G
Series
FA = Force 5 Air Powered
Capacity: (Based on wire rope at mid drum)
5 = (5 tons (10,000 lbs [4,536 kg])
Generation:
A = Third Generation
Drum Length:
S = Short without Drum Brake (15 inches [381 mm])
S = Short with Drum Brake (12 inches [305 mm])
L = Long without Drum Brake (27 inches [686 mm])
L = Long with Drum Brake (24 inches [610 mm])
Drum Brake: Note: addition of drum brake reduces the drum length 3 inches [76 mm]
A = Automatic Drum Brake
M = Manual Drum Brake
X = None
Disc Brake:
K = Automatic Disc Brake (Standard)
X=None
Control:
1 = Winch mounted lever throttle (Standard)
* 2 = Remote pilot pendant throttle with standard length (6 ft/1.8 m) hose
** 2XX = Remote full flow lever throttle (maximum 20 ft/6 m)
** 3XX = Remote pilot pendant throttle (standard = 6 ft/1.8 m; maximum 66 ft/20 m)
** 4XX = Remote pilot lever throttle (maximum 66 ft/20 m)
5XX = Remote electric over air throttle †
Options:
7 = Drum grooving (Number = wire rope size in sixteenths, e.g. 7/16 inch) †
C = Low Temperature Components; specify -10° C (14° F) or -20° C (-4° F)
D = Drum divider flange and additional wire rope anchor †
E = Construction Cage
F = Free spool clutch (available only with manual drum brake)
G = Drum Guard
H = Open Front frame for horizontal pulling
K = K6 footprint base
*** M1 = Material Traceability (typical material results) ††
*** M2 = Material Traceability (actual material results) ††
*** M3 = Material Traceability (actual material results for these parts in finished, as-delivered condition) ††
N = Type Approval - Specify: • American Bureau of Shipping (ABS)
• Det Norske Veritas (DNV) • Lloyd’s Register of Shipping (LRS)
Q = Special Paint
T = Tensioning Manifold
U = Underwound wire rope operation (available only with automatic disc brake)
V = Press Roller †
-E = Compliance with European Community Machinery Directive: • Muffler • Overload Device
• Main air supply emergency shut off • Drum Guard • CE Documentation
Notes: *
**
***
††
Available only with auto disc brake or with auto drum brake.
Remote throttles are provided with 6 feet (1.8 metres) of hose. Specify hose lengths greater than 6 feet (1.8 metres).
Contact your Ingersoll-Rand distributor or the factory for control acceptability for hose lengths greater than 60 feet
(18.3 metres). Metric lengths are provided for reference only, order lengths in feet.
Documentation, witness testing and material traceability available; must be requested at time of order. Specify options or
contact the factory or your nearest Ingersoll-Rand distributor for information.
Not covered in this manual.
Refer to ‘Traceability’ on page 7 for a description of the differences between M1, M2 and M3.