Filter
Top Products
700 Tm Owner’s Manual
21
Workout Programs
BELT START SEQUENCE
Belt start sequence is designed with your safety in mind. It is an indication to let you
know that the treadmill motor is about to start.
Anytime, treadmill is ready to starts from 0mph, the belt start sequence will appear as
below:
• Dot matrix will display “ 3, 2, 1, GO”
• As soon as GO appears, the belt will starts at 0.5mph and increasing to
appropriate setting and program timer will begin.
WARM UP
Getting Started
This treadmill automatically initiates a 3-minute Warm Up at the beginning of each pro-
gram. It is designed to pr
epare your body for an intensive workout and to reduce the
possibility of injury during workout.
Note: Warm Up is skipped for the Quick Start or Manual programs. Warm Up is skipped
if it is a re-start program or switching from another program.
Beginning the Program
Warm Up is active as soon as the “START” key is pressed and a program is executed.
The Dot matrix window will display the default program profile of selected program.
The message display will flash “WARM UP” twice and then switch to display workout
data for few seconds. This sequence will repeat until Warm up is finished.
During the Program
Data Display
• Once it is started, the data display window will start accumulating and display
the default workout data of “time, distance, calories & heart rate”. Press
“SELECT” button to switch the data displays.
• The time will display count down from 3:00.
• Speed display will show default speed of 2.0 mph.
• Incline display will show default incline of 0%..
Adjustment
•
Speed = 2.0mph. Press Speed “UP/DOWN” key or numeric quick key to
adjust the speed from 0,5 – 3.5mph only.
• Incline = 0%. Press Incline “UP/DOWN key or numeric quick key to adjust the
incline from 0 – 15%.
• “START” key can be pressed to skip the warm up and start the program
immediately.
Ending the Program
• When 3-minute duration is up or ST
ART key is pressed, Warm Up will end and
the program will execute.
• There will be a beep sound to indicate the Warm up is over and the selected
program begins.
700tmOM 8/24/06 11:15 AM Page 23