Filter
Top Products
20
700 Tm Owner’s Manual
Console Layout (continued)
c. Enter key:
o After program selecting, press “ENTER” to accept the program and
enter its setup mode.
o After age, weight, time….. adjustment, press “ENTER” key to accept
your entry.
d. Start key:
o Press “START” to start a program during program setup.
o Press “START” key to skip Warm up and enter program executing.
o Press “START” to re-start a program during Cool Down, workout
summary mode.
o Press “START” to resume a program from pause mode.
e. Stop key:
o Press and hold “STOP” button for 2 seconds to reset the console.
o Press “STOP” to pause program run mode.
o Press “STOP” to enter workout summary during Cool Down.
f. Numeric Quick Keys:
o Press numeric keys to enter your Age, Weight during program set
up. After entry, press ENTER to confirm. Ex: Press “5,4” for age 54.
o Press numeric keys to enter Time during program set up. Press
ENTER to confirm after entry. The unit of the entry will be 1 minute.
Ex: Press “1,0,0” for 100 minutes.
o Press numeric keys to enter HR setting during program set up mode
only. Press ENTER to confirm your entry. Ex: Press “1,3,7” for
137bpm.
o Press numeric keys to adjust the Speed during program run mode.
The entry will be 1.0mph increment with no decimal point. Ex: Press
“4” for 4.0mph.
o Press “INCLINE” and numeric keys to adjust Incline during program
run mode. Press “ENTER” to confirm your entry. Ex: Press “INCLINE,
5” for 5%.
o Press “CLEAR” after you press any numeric key to void an entry.
b. Safety key
o Place the safety clip onto your clothes properly before using
treadmill.
o Treadmill will not start unless the safety key is properly
engaged.
o Pull the safety off the treadmill will result power shut off and
stop the treadmill immediately.
o Pull the safety key off the treadmill if you feel ill after using
treadmill or any other emergency occurs.
Numeric Quick
Keys
Start/Stop/Enter
keys
Safety key
700tmOM 8/24/06 11:15 AM Page 22