Filter
Top Products
STEP 34
Assemble two 4-1/2" PULLEYS (43)to two 2 X7-1/4" PLATES
(33) using two 3/8 X 2-1/4" BOLTS (86) four 3/8" WASHERS
(91), and two 3/8" LOCK NUTS (92) as shownin FIGUKE
FIGURE 34 ~ ~
FIGURE 35
STEP 35
¯ To assemble the PRESS CABLE (100) follow the cable routing as shown and use the following steps:
¯
P~oute the PRESS CABLE (100) around pulleys and L-brackets as shown in FIGURE 35.
1/2
[
1/2 [ 1/2 [
1/2 [ 1/2 [
1/2 [
5
6
31