Filter
Top Products
FIGURE 30
STEP 30
I WHEAD scREw//]
\\\
"~ "~ "~ -.... DETAIL 30 .....
6~ 3/8 X 2-1/2 SOCKET HEAD CAP SCI:~EW
SECURELY assemble one 3/8" SPKING PIN ($1) to the spring pin housing of the PRESS BACK SUPPORT (23). (NOTE: Tighten
the nut of the SPRING PIN ASSEMBLY SECURELY.)
¯ SECURELY assemble two 3" WHEELS (63) using two BLACK 3/8 X 2-1/2" SOCKET HEAD CAP SCRI3WS (64) anti two 3/8"
,~EX NUTS (108) as shown in DETAIL 30.
¯ SECURELY assemble two wheel assemblies to the PRESS BACK SUPPORT (23) as shown in FIGURE 30.
¯
SECURELY assemble the SEAT PAD (38) to the PRESS SEAT ADJUST (12) using two 3/8 X 2-3/4" BOLTS (85) and two
WASHERS (91). See FIGURE 30.
¯
Pull back the 3/8" SPRING PIN (51) on the PR]~SS BACK SUPPOP~T (23) and slide the PRESS SEAT ADYUST (12) into
receiving well. Engage the 3/8" SPRING PIN (51) into one of the adjustment holes.
26