Filter
Top Products
~1/2 X 4-1/2"
STEP 26
¯
SECURELY assemble the BEARING HOUSING (6) and the CENTER PULLEY BRACKET (26) to the FRONT UPRIGHT
using two 1/2 X 4-1/2" BOLTS (89), four 1/2" WASHERS (93), and two 1/2" LOCK NUTS (94). See FIGURE
¯
Attach two 1 X 1" GUIDES (53) to the ANGLE on the UNDERSIDE of the BEARING HOUSING (6). See FIGURE 26.
~)3/8 X 2"
FIGURE 27
STEP 27
¯ LOOSELY assemble two 3-1/2" PULLEYS (42)
the CENTER PULLEY B~dkCKET (26) using two
8 X 2" BOLTS (84), two 2-3/8" L-BRACKETS (45),
four 3/8" WASHERS (91), and two 3/8" LOCK
NUTS (92). See FIGURE 27.
(NOTE: This connection wil be tightened after
the cable has been routed.)