6-4
Camera Options and Accessories
Formatting memory cards
The included CompactFlash Card is formatted prior to
shipment. Only format a memory card when you want to
erase all the data on the card or when a message on the LCD
monitor instructs you to do so.
To format a memory card, follow these steps.
c
Caution:
When you format a memory card, all the data on the
card is erased, including any locked images.
1. Make sure the memory card is inserted in the camera.
See “Installing and removing a CompactFlash Card”
on page 1-13.
2. Turn on the camera, turn the dial switch to , then
press Memory SETUP.
3. Press MEMORY CARD FORMAT to format the
memory card.
Note:
If no memory card is installed in the camera, the
MEMORY CARD FORMAT
button is unavailable.
4. A confirmation message appears. Press the Yes button
to format the card. Press No to cancel the operation.
Note:
If any photos in the memory card are locked, a message
is displayed informing you that the photos will be
erased if you reformat the card. Press
Yes
to format
the card. Press
No
to cancel.
5. Press the Back button.
Using the AC Adapter
The AC adapter (B867✽✽1) allows you to connect your
PhotoPC 3000Z to a standard electrical outlet. This is
especially useful when you are previewing pictures,
transferring pictures, operating the camera from your
computer, or using the Print Mark program. The adapter
powers the camera, but does not charge the batteries. In
some locations the AC adapter comes with a separate AC
power cable.
