A SERVICE OF

logo

Using Print Mark to Print Photos
5-5
5
7. Press the left and right arrow icon buttons to select a
photo that you wish to include with the white frame.
The number at the bottom in the LCD monitor shows
the frame number.
Note:
You can enlarge the preview of the selected photo by
pressing the magnification icon button. Press the
BACK button to return to the normal selection screen.
8. Press the up and down arrow icon buttons to specify
the number of copies of the selected photo to print in
each index. You can specify up to 99 copies. When you
specify a value other than 00, a check mark appears on
the selected photo. The value 00 implies no selection.
9. Repeat steps 7 and 8 above to select other photos to
include and to specify the number of copies.
10. Press the BACK button.
11. Press the Done button to confirm your settings. If you
change your mind, press the BACK button to return to
the photo selection screen. To quit without making the
new DPOF file, press Cancel.
12. Press the right and left arrow icon buttons to specify
the number of copies of the index to print. You can
specify up to 99 index print copies.
13. Press the Save button. A confirmation screen appears.
14. Press the Save button to save your settings. The main
menu of the Print Mark program appears.
If you want to change the current settings, press the
BACK button to return to the previous screen. To
change all or just selected photos are included in your
index print, return to step 5.
15. Press the Exit button to return to the program selection
menu.
Confirming and Changing the DPOF File
To confirm or change the current DPOF settings using Print
Mark, follow the steps below.
1. Set the dial switch to and turn on the camera.
2. Press the PrintMark button. The Print Mark main menu
is displayed.
3. Press the Confirm button to show the confirmation
screen. The current DPOF settings are displayed on the
LCD monitor.