3-2
Viewing and Managing Your Images
2. To display four photos at a time, press the Multi button
once. Multi changes to 1/9, and small “thumbnails” of
the last four photos you took appear on the screen, with
the currently selected photo framed in white.
Press the 1/9 button to display nine photos at a time. 1/
9 changes to 1/1.
3. Press the arrow icon buttons to select an photo with the
white frame. Hold the button down to move through
the photos quickly.
When the frame reaches the first or last photo in the
current group, the previous or next group of photos is
displayed.
4. To display only the currently selected photo, press the
1/1 button. 1/1 changes to Multi.
Magnifying photos
You can view a magnified version of the photos saved in
your camera on the LCD monitor. Follow the steps below.
1. Set the dial switch to , then turn on the camera.
2. To magnify the currently displayed photo, press the
button.
3. A magnified view of the photo appears, and an icon in
the top left corner of the LCD monitor indicates the
portion of the photo which is currently displayed.
Scroll the screen up, down, right, or left using the arrow
icon buttons. You can scroll quickly through the screen
by holding down any one of the arrow icon buttons.
Note:
When magnifying a panoramic picture, you can only
scroll left and right.
4. To exit the magnification screen, press BACK.
Viewing a slide show of your photos
The slide show feature plays back a series of photos on your
camera’s LCD monitor. Your PhotoPC 3000Z’s slide show
includes navigation features and gives you full control of
the photos in your slide show. To use the slide show, follow
the steps below.
Note:
To adjust the brightness of the LCD monitor, see “Setting
the LCD monitor’s brightness level” on page 4-21.
1. Set the dial switch to , then turn on the camera.
2. Press the Menu Change button, then press the SLIDE
SHOW button.
