Using Print Mark to Print Photos
5-7
5
LCD Monitor Messages
When you use the Print Mark program, various error and
status messages may appear on the LCD monitor. For
detailed explanations of these messages, refer to the
following table.
Message Explanation
No photos in memory. This message appears when there are no photos
saved on the memory card. Press the BACK
button to return to the program selection menu.
Turn off the camera and insert a memory card
that contains photos.
Error!
Unable to access
DPOF file.
This message appears when you remove the
memory card while using the Print Mark
program. Press the BACK button to return to
the main menu. Turn off the camera and reinsert
the memory card before turning the camera
back on.
Note:
Never remove the memory card during
operation; otherwise, the photos on the memory
card may be lost.
No memory card
inserted.
The memory card is not inserted in the camera.
Insert the memory card and press BACK
button.
Batteries are low.
Use AC adapter.
The batteries are almost out of power. Press the
BACK button. Connect the AC adapter to the
camera.
Note:
If this message appears while making the
DPOF file, you will be unable to save the new
settings.
You cannot select any
more images.
You have reached the maximum number of
photos that you can select to print. Press the
BACK button. If you want to select more
photos, cancel some other selections.
You will lose the last
print settings.
Are you sure?
A DPOF file is already saved on the memory
card. Press Cancel to quit without overwriting
the DPOF file. Press Done to make a new DPOF
file. The new file replaces the old one. The
memory card only holds one DPOF file at a
time.
This camera cannot
use existing DPOF
file.
This message appears when the Print Mark
program tries to read an invalid DPOF file made
by another camera. Press the Delete and make
new settings button to delete the invalid file and
create a new file. Press the BACK button to
cancel the operation.
Unable to save DPOF
file.
Not enough memory
available on card.
The memory card has insufficient space to save
the DPOF file. Press any button to cancel the
operation and return to the program selection
menu. If you want to make a DPOF file, erase
some photos from the memory card and try
again.
Message Explanation
