Filter
Top Products
OK to see the written description of the result. Scroll UP or DOWN to view other values.
Delete OwnOptimizer Value
Select Test > Optimizer > Trend
Select the value and press and hold LIGHT. Delete value? No/Yes is displayed. Confirm with OK.
Reset the Trend File
Select Test > Optimizer > Reset
You can reset the OwnOptimizer test period. All the test results will be deleted from the memory. When
taking the test after a 365-day test period, or for the first time in 30 days, Reset test period? is
displayed.
Analyzing Results with Polar ProTrainer 5 software
Downloading test results to the Polar ProTrainer 5 software offers you the possibility of analyzing
results in various ways, as well as accessing more detailed information about your progress. The
software also allows you to make graphical comparisons with previous results. The Polar OwnOptimizer
results are downloaded automatically to the software when you download exercises using the Transfer
Data option.
10. USING A NEW TRANSMITTER
Using a New Transmitter
Your CS600X cycling computer has been taught to work together with the Polar WearLink W.I.N.D.
transmitter. In other words, your cycling computer receives signals from your transmitter only, and
enables disturbance-free exercise in a group.
If you purchase a new transmitter as a separate accessory, it has to be introduced to the cycling
computer. This is called teaching and takes only a few seconds.
To prevent interference during a cycling event, make sure you perform the teaching process prior to the
event.
Teaching a New Transmitter
Wear the transmitter and make sure that you are not near (40 m/131 ft) other Polar WearLink W.I.N.D.
transmitters. In time mode, press OK. The cycling computer starts searching for the transmitter signal.
Once the new transmitter is identified, New WearLink found, Teach new WearLink? is displayed.
• Select Yes to confirm teaching. Completed! is displayed once the teaching process is over. Start
exercise recording by pressing OK.
• Select No to cancel teaching.
11. USING A NEW ACCESSORY
Using a New Accessory
A new sensor purchased as a separate accessory has to be introduced to the cycling computer. This is
called teaching and takes only a few seconds. Teaching ensures that your cycling computer receives
signals from your sensor only, and enables disturbance-free exercise in a group. If you have purchased
the sensor and the cycling computer as a set, the sensor has already been “taught” to work together
with the cycling computer. You just need to activate the sensor in your cycling computer.
You can teach one Speed, Cadence and Power sensor for each bike setting.
Teaching a New Speed Sensor
Select Settings > Bike > Bike1/2/3 > Speed > On/Off.Teach new sensor? is displayed
Polar CS600X User Manual 46