Filter
Top Products
rate, and matches sport zone 3, you can press and hold LAP to lock your heart rate into this zone. Sport
zone3 Locked 70-79 is displayed. An alarm sounds if you are below or above the sport zone (if the target
zone alarm function is on). Unlock the sport zone by pressing and holding OK again: Sport zone3
Unlocked is displayed.
Zoom the Display
Press and hold UP to zoom into the upper row, and DOWN to zoom into the middle row. Return to the
normal display by pressing and holding the button again.
Illuminate the Display (Night mode on)
To illuminate your display, press LIGHT during the exercise. Night mode is turned on, and the display
illuminates automatically when any button is pressed or exercise phase is changed.
View Settings Menu
Press and hold LIGHT > Settings
The Settings menu is displayed when pressing and holding LIGHT. In the settings menu you can change
certain settings without pausing the exercise recording. The contents of this menu vary according to
the exercise type. For further information, see 7. Settings.
• Prev. phase: View summary information of the previous phase or repetition (displayed when you have
created an exercise with phases with the Polar ProTrainer 5 software).
• Keylock: Lock/unlock buttons to prevent accidental button presses.
• Autoscr.: Select the Auto scroll On/ Off and displays will scroll during the exercise.
• TZ Alarm: Turn target zone alarm sound on/off.
• Change zone: Switch target zones (displayed when you have defined multiple target zones, except
when an exercise with phases is created with the Polar ProTrainer 5 software).
• HR view: Select how to view your heart rate.
• Seek sensor: Searches for WearLink, Speed, Cadence* and Power* data, if the signal disappears
during exercise due to interference.
• A.Lap: Switch the automatic lap function on or off.
• Arr. time: Set the arrival time On/Off.
Once you have changed the settings, the cycling computer will return to exercise mode.
* Optional sensor required.
Pause Exercise
Pause exercise recording by pressing STOP.
In pause mode, you can select:
• Continue, to continue exercise recording.
• Exit, to stop exercise.
• Summary, for a summary of functions
• Settings, to change all the settings used during exercise, including display personalization, which
cannot be accessed during exercise.
• Reset, to delete recorded exercise information. Confirm with OK and press OK again to restart
recording.
• Reset trip, to reset a distance. Confirm with OK and press OK again to restart recording.
• Location*, for current location, using the latest GPS coordinate data. Latitude and longitude are
expressed in degrees and minutes. Number of visible satellites visible on lowest row.
• Free mode, to change your exercise profile to free exercise type. This does not delete the exercise
you have performed, but will continue the exercise without settings. If you switch to Free mode, you
can restart the original exercise by pausing the exercise again, and choosing Restart P1.
*Optional G3 GPS sensor W.I.N.D. required.
Polar CS600X User Manual 19