Filter
Top Products
4 - 40 HOW TO USE THE INSTRUMENT
TRACE STORAGE SAVE
- Turn the TRACK control to select the memory location in which to store
the trace data.
Observe that eight memory locations ’m1 to m8’ (or 50 memory locations when
extended memory is installed) scroll through the menu. All locations are marked
with a circle before the memory number.
- Select memory location ’m1’.
- Press the ’save’ softkey.
The signal is saved in memory location m1.
Observe that the circle before ’m1’ is solid now to indicate that this memory
location is occupied.
- Set the MainTB to 500
µ
s.
- Select location ’m2’.
- Press the ’save’ softkey.
- Set the MainTB to 200
µ
s/div.
- Select location ’m3’.
- Press the ’save’ softkey.
Observe that memory locations ’m2’ and ’m3’ are now solid bullets as well.
TRACE STORAGE CLEAR
You can also clear a memory location.
- Select location ’m2’.
- Press the ’clear’ softkey.
This clears memory location 2. This is indicated by the open circle.