Filter
Top Products
5 - 20 FUNCTION REFERENCE
CURSORS TIME
The time cursors are used for time
measurements. The example shows the
required softkey settings for period
measurements. The cursor positioning
with the TRACK and ∆ controls is also
shown.
CURSORS VOLT
The volt cursors are used for
voltage measurements. When
more than one channel is on, the
desired channel for voltage
readout must be selected with the
ch1, ch2 pair of softkeys. When
more than one channel is on, the
desired channel for voltage
readout must be selected with the
ch1, ch2 pair of softkeys. In digital
mode stored traces can
also be used for voltage measurements. The figure shows the required settings.
The cursor positioning with the TRACK and ∆ controls is also shown. The
example shows how peak-peak voltage measurement is done.
CURSORS
on
ST6553
9303
READOUT
ch...∆T=...
TRACK
∆
#
off
CURSORS
off
ch1
ch2
-
-
ST6552
9303
READOUT
ch2∆V=...
TRACK
∆
#
on